在干燥设备闪蒸干燥，的开发、研究中不断地创新及改造，设计制造了一系列工艺先进且节能的产品。并根据市场的需要研制开发了几十种干燥、制粒、混合、除尘系列，产品广泛适用于制药、化工、食品、轻工等行业工业原料或产品的干燥除湿，深受用户好评。

In the drying equipment of flash drying, development, research innovation and transformation, a series of advanced technology and energy-saving products design and manufacture. And developed dozens of drying, granulating, mixing, dust series according to the needs of the market, the drying products are widely used in pharmaceutical, chemical, food, light industry and other industrial raw materials or products, praised by users.

热空气由入口管以适宜的喷动速度从闪蒸干燥机底部进入搅拌粉碎干燥室，对物料产生强烈的剪切、吹浮、旋转作用，于是物料受到离心、剪切、碰撞、摩擦而被微粒化，强化了传质传热。

Hot air from the entrance pipe with suitable spouting velocity from the flash dryer into the bottom stirring and crushing and drying chamber, have strong shearing, blowing floating and rotating effect of material, so the material by centrifugal, shear, collision, friction and particle, strengthen the heat and mass transfer.

常州市华源干燥设备有限公司多年来吸收国内外的先进技术与经验，闪蒸干燥，严格按行业内相关要求设计、开发、生产、安装和服务于一体，确保产品质量。

Changzhou Huayuan drying equipment limited company for many years to absorb advanced technology and experience at home and abroad, the flash drying, in strict accordance with the relevant requirements of the industry design, development, production, installation and service, ensure the quality of products.

在闪蒸干燥干燥机底部，较大较湿的颗粒团在搅拌器的作用下被机械破碎;湿含量较低，颗粒度较小的颗粒被旋转气流夹带上升，在上升过程中进一步干燥。由于气固两相作旋转流动，固相惯性大于气相，固气两相间的相对速度较大，强化两相间的传质传热，所以该机生产强度高。

At the bottom of flash drying dryer, particles larger wet is crushed under the action of the stirrer; the moisture content is low, while small granules by rotating airflow rise, further drying in the rising process. As the gas solid two phase flow, the solid phase is larger than the gas phase, the relative velocity of the solid gas two phase is larger, and the heat transfer of the two phase is enhanced, so the production intensity of the machine is high.

由于干燥室内周向气速高，物料停留时间短，达到高效、快速、小设备、大生产。

Due to the high gas velocity in the drying room, the material retention time is short, and the high efficiency, rapid, small equipment and large scale production are achieved.

干燥气体进入干燥机底部，产生强烈的旋转气流，对器壁上物料产生强烈的冲刷带出作用，消除粘壁现象。

Drying gas into the dryer at the bottom, a strong rotation of the flow, the wall of the material on the wall to produce a strong effect of erosion, eliminating the phenomenon of wall sticking.

干燥室上部加装陶析环及旋流片可以控制出口物料的粒度及湿度，以达到不同物料的终水份及粒度的要求。

The size and humidity of the drying chamber with Tao Xihuan flow pieces and can control the export of materials, final moisture and particle size to meet the requirements of different materials.

如需更多闪蒸干燥工作原理及特点，欢迎进入我公司官网咨询，我公司将有专业人士为您指导。

If you need more work principle and characteristics of flash drying, welcome to my company's official website consultation, we will have professionals to guide you.